(50) new pieces of Norma 7.7 Japanese Brass for reloading
NORMA BRASS KEY FEATURES:
Neck – Annealed to achieve proper elasticity and prevent splitting, NORMA cases are then put through a final polish process to ensure superior appearance in addition to superior performance
Shoulder – NORMA applies over a century of experience and proprietary tooling to ensure dimensionally perfect headspace
Body – Laboratory Inspection ensures proper hardness over the length of the case; softer at the neck, getting progressively harder towards the case head.
Tolerances – In-house tooling production allows NORMA to not only control tolerances of the finished product, but of the production tools and machines themselves. With tooling tolerances down to 7 thousands of a millimeter, NORMA is proud to have the tightest tolerances in the industry
Flash Hole – Three quality control inspections for the flash hole ensure a perfect centered and burr free product. Benchrest quality in every case!
Primer Pocket – Proper hardness of the primer pocket is critical to long case life. At NORMA, each production run is tested to a minimum of ten reloading cycles
First, I found out about Raven Rocks and this on the Arisaka forum. These guys are clearly into the vintage stuff too!
This is my first time having any brand new brass and the Norma brass is clearly top of the line. One thing I am very impressed with is the flash holes in the brass – Norma doesn’t appear to punch them (maybe drill?) so no prep needed there. The are all the correct length so no trimming needed. I did have to run them through my sizing die without bumping the shoulders back just because as with any new brass some gets dented in shipping – this is normal and minimal effort. Overall I gave 5 stars on this brass.
This brass is awesome and was ready to load out of the box.
First, I found out about Raven Rocks and this on the Arisaka forum. These guys are clearly into the vintage stuff too!
This is my first time having any brand new brass and the Norma brass is clearly top of the line. One thing I am very impressed with is the flash holes in the brass – Norma doesn’t appear to punch them (maybe drill?) so no prep needed there. The are all the correct length so no trimming needed. I did have to run them through my sizing die without bumping the shoulders back just because as with any new brass some gets dented in shipping – this is normal and minimal effort. Overall I gave 5 stars on this brass.